Accessories

ANEP ref: J-AA-001TECHNICAL SPECIFICATIONS Fixing screws supplied (ALIM TMS-II-IP not included) For 19" rack 2U height DOCUMENTS & PATCHES

ALIM TMS II IP is a connected back-up power supply. Ensures the continuity of equipment service in the event of a power outage. Permanently checks the presence of 230 Vac and the state of charge of the battery. Communicates information via an IP network to a Syslog...

ALIM TMS 2 is a safeguarded and controlled DC power supply, intended to be connected to the 230 Vac public distribution network. It ensures the continuity of service of equipment in the event of a power outage It complies with standards EN60950 - EN61000-3 - EN61000-4...

Standard self-adhesive plate to be placed in the cabin to indicate to the user the presence of a magnetic loop for the hearing impaired.

Bag N°3 Accessories BOX F with 50m cable

Ref. ANEP: A-BA-023 The Y CORD KIT allows the connection of 2 telephones in the cabin to a single ANEP BOX on the roof of the cabin. Its use is recommended for elevator cabins or large goods lifts (car lifts for example). (delivered with 10cm cord), valid for...

Glass for fireman's square 2x43x77mmDOCUMENTS & PATCHES

Modem for receiving alarms and technical calls. Interface between reception PC and a telephone line.DOCUMENTS & PATCHES

Ref.anep: A-BA-055 SQUARE FIREFIGHTER 70x260 Ref.ANEP: A-BA-008 Firefighter square 110X310 Ref.ANEP: A-BA-009 firefighter square 140X310 DOCUMENTS & PATCHES

Ref. ANEP: J-CA-006 Instruction plate indicating to users the principle and use of the alarm in the cabin. Self-adhesive fixing 140x80mm

Kit of 4 sensors for floor announcement and door opening/closing. Use for BOX-TX - BOX-TX+ and BOX-ALTOTECHNICAL SPECIFICATIONSRef. ANEP: A-BA-003 Works on elevators up to 10 levels elevator speed 1m60/seconds Single access elevator CONTACT NO. DOCUMENTS &...

ALIM CONTROL II is designed to work with the ANEP BOX product range. Battery-backed power supplyTECHNICAL SPECIFICATIONSRef. ANEP: A-BA-039 Autonomy: 2 hours accumulator: 12V / 800 mAh the 12V accumulator is delivered charged but not connected. Complies with EN 81-28...

Ref. ANEP: J-CA-001 12V 2.2 Ah backup battery

Ref.ANEP: J-DA-003 POWER SUPPLY-24V 60W 2.5A for BOX-DISCRI (AET3000/ 4000/ ALTO)DOCUMENTS & PATCHES

Ref.ANEP: J-DA-002 POWER SUPPLY-24 V 5A for BOX-DISCRI (AET3000/ 4000/ ALTO)DOCUMENTS & PATCHES

BOX DISCRI is a peripheral of the ANEP BOX module meeting the filtering specifications of the European standard NF EN 81-28TECHNICAL SPECIFICATIONSRef.ANEP: A-BA-020 unlock zone (or door zone) CAR DOOR CONTACT CONTACT landing doors cabin movement (cam, brake)...

Connecting cable between the machinery and the bottom of the pit for BOX -C speech TECHNICAL SPECIFICATIONSRef.ANEP: C-AA-001 (30M T10 cable) Ref.ANEP: C-AA-002 (Cable T10 45M) Ref.ANEP: C-AA-003 (Cable T10 60M) Ref.ANEP: C-AA-010 (T10 90M cable) Cable type: SYT PLUS...

Ref. ANEP: A-BA-032 Box for connecting the cabin position actuators to the TX/TX+ or ALTO BOX and the AET4000 cabin DOCUMENTS & PATCHES

Elevator - goods lift - car lift - platform. THE ANEP BOX M MODULE is an intercom system allowing communication between:• the elevator machinery and the top of the cabin,• the elevator machinery and the interior of the cabin,• the elevator machinery and the pit, BOX-C...

Elevator - Goods lift - EPMR DIALCO 2-point intercom system TECHNICAL SPECIFICATIONSRef.ANEP: L-AA-001 independent and autonomous intercom. Communication operating on 2 wires Base / handset installed in machinery, or maneuvering (for asc type MRL). Audio box installed...